Power Stop Stainless Steel Brake Line Kit BH00018
PowerStop's stainless steel brake line kits as a performance replacement for your OE rubber brake hoses. Our red stainless-steel brake line kits are DOT FMVSS106 certified. They are made with premium PTFE material with permanently crimped-on zinc plated steel fittings. They are encased in a stainless-steel braid and red PVC outer cover to provide superior protection against abrasion and corrosion. Our hoses have passed numerous vigorous tests such as expansion and burst strength, whip resistance, water absorption, and tensile strength just to name a few.
- Stainless Steel Braid and Red PVC Outer Cover
- Provide Superior Protection From Abrasions And Corrosion
- Made w/Premium PTFE Hose
- Permanently Crimped-On Zinc Plated Steel Fittings
- D.O.T. Certified
- Incl. Necessary Bolts And Washers Required for Installation
- Banjo Bolt Quantity: 4
- Brake Hose Mounting Clip Qty.: 4
- Brake Hose Quantity: 4
- DOT Approved: Yes
- Hose Color: Red
- Hose Fitting Type: Female
- Hose Fitting Type: Banjo Sixty Degree Bend
- Hose Fitting Type: Banjo
- Hose Length: 679.00 mm
- Hose Length: 654.00 mm
- Hose Length: 472.00 mm
- Hose Length: 26.00 in.
- Hose Length: 25.00 in.
- Hose Length: 18.00 in.
- Hose Material: Inner Layer: PTFE; Middle layer: 304 Braided Stainless; Outer Layer: Transparent Red PVC
- Inside Diameter: 0.190 in.
- Inside Diameter: 4.76mm
- Warning: May contain chemicals known in the state of California to cause cancer, or birth defects or other reproductive harm. For more information, please visit www.p65warnings.ca.gov